Uretech TG1
General Purpose, Single Component Pedestal Adhesive
Click here to view the Uretech TG1 Technical data sheet.
Click here to view the Uretech TG1 Method statement.
Click here to view the Uretech TG1 BREEAM compliance document.
Click here to view the Uretech TG1 LEED compliance document.
Click here to view the Uretech TG1 VOCs bulletin.
Click here to contact us for the Uretech TG1 safety data sheet.


Uretech TG1 is a general purpose pedestal adhesive that contains zero VOC's, solvents and is not classified as carcinagenic. A single component, moisture curing, adhesive Uretech TG1 has been specially formulated for fixing pedestals used in access flooring.

Uretech TG1 is formulated to use in the bonding of metal pedestals to concrete floors. It is flexible and does not foam excessively during application giving a more solid feel than products that need to foam in order to gap-fill. Uretech TG1 can be used on substrates between -1°C and 30°C.

Uretech TG1 needs no mixing or stirring and can be spread using a knife, squeegee or, more often, by dipping the pedestal into the mix. The rheology of the product is designed to allow the correct amount, for a relatively flat floor, to be held on the pedestal when used in this manner. The material remains in a mobile, liquid form for approximately 5-6 hours, after which the material sets into a soft solid, getting progressively harder over a period of a few days. Tubs can be re-sealed and any skin formed should be removed. Product under the skin will be perfectly fit for use.

Uretech TG1 is supplied as a 9kg unit in a metal pail.

When used correctly a typical rate of 300 to 340 pedestals per 9.000kg Unit should be expected. (Please note that coverage rate may vary with different substrates and application methods).

The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.

Why choose Uretech TG1?

No R40/H351 risk phrase (not carcinogenic)

Cured adhesive is not hazardous for disposal

Not hazardous for transport

GHS compliant labels and safety data sheet

BREEAM compliant

LEED certification


Chemical and water resistant

Single component / No mixing

Zero VOCs

Zero solvents

We love to talk and we are always happy to help so please contact us.
Contact us button

Return to top of page.