PRODUCTS
TekGrip Spectrum
TekGrip Colour Additives
Click here to view the TekGrip Spectrum Technical data sheet.
Click here to contact us for the TekGrip TLK safety data sheet.

Description
TekGrip Spectrum is a coloured mixture containing hydroxy-functional materials blended with a special mix of pigments and additives. Supplied as a single component, liquid/paste for colouring the range of Uretech decorative and high friction adhesives used in surfacing and binding applications. TekGrip Spectrum is compatible with TekGrip DSR, TekGrip DFX and Uretech HFS. TekGrip Spectrum is available in red, green, yellow, blue or black however for large volume orders the Uretech range of surface adhesives can be pre-coloured in the manufacture process.


Click image to enlarge.

Applications
TekGrip Spectrum was developed to colour the range of decorative and high friction surfacing resins manufactured by Star Uretech. No recommendation is made for other staining applications.

Installation
The TekGrip Spectrum safety data sheet should be consulted prior to the commencement of work. Mix the ‘A’ component of the system to be coloured, for one minute to disperse any lumps or settlement. Add the required level of TekGrip Spectrum and continue to stir until fully mixed. Full mixing should take no more than an additional 60 seconds with the correct equipment. The amount of TekGrip Spectrum used will be dependant on the depth of colour required. 200g (one cup) for each 20kg kit of surface adhesive is sufficient for most applications however the Stainer should be added by a repeatable means (Volumetric or weight) to prevent colour variation that may be apparent in the completed application.

Packaging
TekGrip Spectrum is supplied as a 5kg unit: 5Ltr Jerry containing 5.000kg coloured liquid.

Coverage
A 5.000kg TekGrip Spectrum unit is usually sufficient for colouring 24 x 20kg kits of decorative resin with a typical addition rate of 200g however more vivid colours may require up to 300g of TekGrip Spectrum per kit.

Disposal
The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.


Why choose TekGrip Spectrum?

The only system approved for use with TekGrip surfacing products

Cured product is not hazardous for disposal

Not hazardous for transport

GHS compliant labels and safety data sheet

Non-flammable

Chemical and water resistant

Zero VOCs

Zero solvents


We love to talk and we are always happy to help so please contact us.
Contact us button



Return to top of page.