Uretech PA1 Ultra
High Performance, Single Component Pedestal Adhesive
Click here to view the Uretech PA1 Ultra Technical data sheet.
Click here to view the Uretech PA1 Ultra Method statement.
Click here to view the Uretech PA1 Ultra BREEAM compliance document.
Click here to view the Uretech PA1 Ultra LEED compliance document.
Click here to view the Uretech PA1 Ultra T42 & T15 test report.
Click here to view the Uretech PA1 Ultra VOCs bulletin.
Click here to view the Uretech PA1 Ultra performance bulletin.
Click here to contact us for the Uretech PA1 Ultra safety data sheet.


Uretech PA1 Ultra is unlike any other pedestal adhesive and is the only product that contains zero VOC's, solvents, phthalates, halogens and phosphates. It passes both the T42 & T15 PSA MOB tests after just 24 hours and is not classified as carcinagenic. A single component, moisture curing, adhesive Uretech PA1 Ultra has been specially formulated for fixing pedestals used in access flooring.

Click image to enlarge.

Uretech PA1 Ultra is formulated to use in the bonding of metal pedestals to concrete floors. It is flexible and does not foam excessively during application giving a more solid feel than products that need to foam in order to gap-fill. Uretech PA1 Ultra can be used on substrates between -5°C and 35°C.

Uretech PA1 Ultra needs no mixing or stirring and can be spread using a knife, squeegee or, more often, by dipping the pedestal into the mix. The rheology of the product is designed to allow the correct amount, for a relatively flat floor, to be held on the pedestal when used in this manner. The material remains in a mobile, liquid form for approximately 4-5 hours, after which the material sets into a soft solid, getting progressively harder over a period of a few days. In ideal conditions pedestals can be subjected to the standard sand-bag test after 24 hours at 23°C. Tubs can be re-sealed and any skin formed should be removed. Product under the skin will be perfectly fit for use.

Uretech PA1 Ultra is supplied as a 9kg unit in a metal pail.

When used correctly a typical rate of 200 to 220 pedestals per 9.000kg Unit should be expected. (Please note that coverage rate may vary with different substrates and application methods).

The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.

Why choose Uretech PA1 Ultra?

Listed on Googles portico healthy materials

Passes T42 (swing bag) test after less than 24 hours

Passes T15 (horizontal load) test after less than 24 hours

No R40/H351 risk phrase (not carcinogenic)

Cured adhesive is not hazardous for disposal

Not hazardous for transport

GHS compliant labels and safety data sheet

BREEAM compliant

LEED certification


Chemical and water resistant

Single component / No mixing

Zero VOCs

Zero solvents

Zero phthalates

Zero halogens

Zero phosphates

We love to talk and we are always happy to help so please contact us.
Contact us button

Return to top of page.