Click here to visit our our dedicated highway surfacing and repair website -

Uretech MTC
Micro Trenching Compound
Click here to view the Uretech MTC Technical data sheet.
Click here to view the Uretech MTC conformance statement.
Click here to view the Uretech MTC marketing brochure insert.
Click here to view the Star Uretech Architects Manual.
Click here to contact us for the Uretech MTC safety data sheet.

Uretech MTC is a polyurea micro trenching compound designed for small section channel and trench filling, and small scale horizontal repairs to bituminous and concrete surfaces where its slump characteristics allow it to fill deep but narrow voids without mechanical compaction. Using Uretech MTC can save considerable time in deployment, as well as using fewer resources, and can have a reduced environmental impact, with less waste removed from trenches or transported to the site for backfill.

Click image to enlarge.

Uretech MTC is designed to fill and/or repair narrow voids without mechanical compaction. It is pigmented yellow to provide a warning of the presence of underlying electrical installation.

Uretech MTC can be mixed in a standard cement mixer or a forced action mixer such as a Creteangle, Baron or Daines mixer. The aggregate should be tipped into the mixer first which is then started, and then the remaining components should be added in the order B, C & D and mixing continued until a uniform mix is obtained. This should take between 1 and 2 minutes depending on the mixer being used. The mixed material can then be poured into the microtrench/void by mechanical means or manually, with subsequent minor agitation to produce a level surface. The compound will be fit for traffic after 1-4 hours dependent on ambient temperature.

Uretech MTC is available as a 20kg kit of pre-measured components.

A single kit of Uretech MTC is sufficient to fill 0.012m³. (A 1.3m long trench that is 20mm wide and 450mm deep.)

Click image to enlarge.

The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.

Why choose Uretech MTC?

Innovative, high performance product

Prevents disruption or damage to exsisting infrastructure

BBA HAPAS Approved material

Cured product is not hazardous for disposal

Not hazardous for transport

GHS compliant labels and safety data sheet


Chemical and water resistant

Zero VOCs

Zero solvents

We love to talk and we are always happy to help so please contact us.
Contact us button

Return to top of page.