Uretech AA2
Acoustic & Sound Dampening Pedestal Adhesive
Click here to view the Uretech AA2 Technical data sheet.
Click here to view the Uretech AA2 Method statement.
Click here to view the Uretech AA2 BREEAM compliance document.
Click here to view the Uretech AA2 LEED compliance document.
Click here to view the Uretech AA2 airbourn and impact sound insulation test report.
Click here to view the Uretech AA2 VOCs bulletin.
Click here to contact us for the Uretech AA2 safety data sheet.


Uretech AA2 is the only acoustic pedestal adhesive that passes both (BSEN ISO 140-4:1998) airbourn and (BSEN ISO 140-7:1998) impact sound insulation tests, contains zero VOC's and solvents and is not classified as carcinagenic. A two component, moisture curing, adhesive Uretech AA2 has been specially formulated for fixing pedestals in access flooring where sound and vibration reduction is required.

Uretech AA2 is specially formulated to provide a sound and vibration damping effect by forming a viscoelastic layer between the pedestal and substrate. Uretech AA2 provides an excellent reduction of foot traffic and other acoustic noise or vibration. Uretech AA2 can be used on substrates between -5°C and 35°C.

Uretech AA2 can be mixed by using a drill stirrer in approximately 6.5kg ‘kits’ then being applied to the base of the pedestal using a serrated spreader or trowel. Mixing should take place by stirring of the ‘B’ component into the ’A’ component and continuing to stir until mixed.The material remains in a mobile, liquid form for approximately 4-5 hours, after which the material sets into a soft solid, getting progressively harder over a period of a few days.

Uretech AA2 is available as a 6.500kg kit containing two, pre-measured components, both held within a 20 Ltr plastic bucket.

When used correctly a typical rate of 80 to 100 pedestals per 6.500kg kit should be expected. (Please note that coverage rate may vary with different substrates and application methods).

The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.

Why choose Uretech AA2?

BSEN ISO 140-4:1998 airbourn sound insulation.

BSEN ISO 140-7:1998 impact sound insulation.

No R40/H351 risk phrase (not carcinogenic)

Cured adhesive is not hazardous for disposal

Not hazardous for transport

GHS compliant labels and safety data sheet

BREEAM compliant

LEED certification


Chemical and water resistant

Zero VOCs

Zero solvents

We love to talk and we are always happy to help so please contact us.
Contact us button

Return to top of page.